Brass Zinc Alloy Low Pressure Casting Machine Automated Operation
High-Quality Factory Offered Brass Zinc Alloy Low-Pressure Casting
Machine With Good Materials
Ⅰ ABOUT LOW PRESSURE DIE CASTING MACHINE
In low pressure casting process molten metal is filled directly
from the holding or casting furnace into the dies and sand mould
from below, with low turbulence and an absolutely controlled filled
casting process.
Low pressure die casting machines for brass for the casting of
sanitary fittings, faucets, water meter or valve bodies.
To fulfill the different capacity requirements, a full range of
machines with one or two manipulators and one, two or three riser
tubes can be supplied. We deliver the machines with freely
programmable Siemens control.
Ⅱ ADVANTAGES OF TWO MANIPULATORS LOW PRESSURE DIE CASTING MACHINE
Fully automatic machine with two manipulators mounted on a rotary
turning device and one furnace for the cost-effective production of
high-quality casting products.
1) Capacity per shift (8 hours): 600-700 castings.
2) Automated operation. Energy-saving, environmentally friendly and
efficient production with low melting loss.
3) Features
A. 2 manipulators on a rotary device, operated independently.
Operating Parameters can be edited independently. Two manipulators
are working at the same time or one set changes the die while the
other set is under maintenance;
B. Multiple riser tubes with high production output and flexible
die design;
C. Quick die change flanges;
D. Simple control system;
E. Graphite and die with temperature display and storage;
F. Automatic unloading, automatic sorting of different castings;
G. Drive by servo motor, with high precise, stable and efficiency
performance;
H. Large volume furnace with less variation in furnace temperature
during feeding;
I. Max die dimensions:
LD-5040-D 600*400*240mm;
LD-7050-D 800*500*240mm.
Ⅲ TECHNICAL PARAMETERS
| Code | Basic Equipment | Item | RD-5040-S | RD-7050-S |
| 1 | Basic Parameters | Equipment Size: L*W*H | 7000*6000*4200mm | 7400*6000*4350mm |
| 2 | | Total Weight | 20T | 22T |
| 3 | | Total Power | 180KW | 180KW |
| 4 | | Voltage | 380V | 380V |
| 5 | Casting Die | Max. Die Dimensions | 600*400*240mm | 800*500*240mm |
| 6 | | Max. Die Thickness | 2*120mm | 2*120mm |
| 7 | | Max. Die Opening Stroke | 372mm | 372mm |
| 8 | | Max. Die Weight | 250KG | 500KG |
| 9 | | Max. Force of Die Closing | 2400KG | 4000KG |
| 10 | | Max. Force of Ejector | 1000KG | 1000KG |
| 11 | | Max. Die Ejector Stroke | 48mm | 48mm |
| 12 | Furnace | Melting Rate | 680KG/H | 680KG/H |
| 13 | | Capacity | 2800KG | 2800KG |
| 14 | | Furnace Power | 165KW | 165KW |
| 15 | Hydraulic | Power | 12KW | 12KW |
| 16 | | Rated Pressure | 80pa | 80pa |
| 17 | | Hydraulic Fluid Temperature | ≤55 ℃ | ≤55 ℃ |
| 18 | Cooling System | Water PH | 7~8.5 | 7~8.5 |
| 19 | | Pressure | 3bar | 3bar |
| 20 | | Water Temperature | 20-25 ℃ | 20-25 ℃ |
| 21 | | Flow | ≥300L/Min ≤600L/Min | ≥400L/Min ≤700L/Min |
| 22 | Air Pressure | Compressed Air Pressure | 0.5-0.6Mpa | 0.5-0.6Mpa |
| 23 | | Compressed Air Consumption | 18m3/H | 18m3/H |
FAQ
Q: could you please arrange the installation and commissioning ?
A: Yes , we could and the buyer pay the charge
Q: could you arrange the production education?
A: Yes , we could and the buyer pay the charge
Q:How long the guarantee?
A: one year and charge for repair the whole life.
Q: How about the lead time and delivery time of my order?
A: Large cargo 15-25 working days, depending on the quantity, and
delivered according to the agreed time.
